News

Ikelite has released two “deluxe versions” of its housing for the Sony a6700 featuring a fixed flat port with standard 67mm threads. The housings, which specifically accommodate the camera with the Sony E PZ 16–50mm f/3.5–5.6 OSS lens attached, are designed for use with macro and wide-angle wet lenses with 67mm threads—in much the same way as you would shoot with a compact camera underwater. To make it easier to attach heavier wide-angle lenses, Ikelite recommends using a compatible 67mm-to-bayonet adapter.

The two housing configurations are as follows: The 200FP/T housing bundles the Sony a6700 housing with the Dual Tray with Dual Handles, Trigger Extensions, Vacuum System, a spare O-ring, and TTL circuitry. The built-in TTL electronics mean that you just need to add a single sync cord or a dual sync cord and one or two compatible Ikelite DS strobes, respectively.

By contrast, the 200FP/F housing bundles the Sony a6700 housing with the Dual Tray with Dual Handles, Trigger Extensions, Vacuum System, a spare O-ring, and a built-in Fiber Optic Transmitter. The transmitter attaches to the camera’s hotshoe and translates its flash signals to LED pulses that can be read by compatible strobes by manufacturers such as Inon, Sea&Sea, Retra, Weefine, Kraken, AOI, and Backscatter. Strobes can only be used in manual mode.

Available now from retailers such as Backscatter, the 200FP/T housing is priced at $1,690, while the 200FP/F housing costs $1,715.

When purchasing underwater photography equipment like the products mentioned in this article, please support DPG by supporting our retail partner—Backscatter.com.